7
18.
FX Mode Button:
Use this button to determine whether the
Effects Toggles
activate Seventy’s
internal Flex FX or software effects. While in Flex FX Mode, the
FX Mode Button
will be lit blue. While
in Software Effects Mode, the button will be lit amber.
19.
FX Buttons:
Use these buttons to select or deselect effects for activation by the
Effects Toggles
.
20.
Parameter Knob:
Turn this knob to edit effect parameters and menu settings. When editing menu
settings, press this knob to save your changes to the setting.
21.
FX Joystick:
Push this joystick up and down or left and right to navigate effect parameters and menu
settings.
22.
Depth
: Turn this knob to adjust the “wet-dry” mix of the effects on the corresponding deck.
23.
Tap:
Press this button two or more times at the desired BPM in order to manually set the FX tempo for
the deck in focus on the
Display
. To reset the FX tempo back to automatically matching the software
tempo, press and hold the
Tap button
for three seconds.
Hold
Shift
and press the
Tap button
to bring up Seventy’s settings menu.
24.
Sampler Level
: Turn this knob to adjust the volume level of the software sampler.
25.
Cue Slider:
Push this slider to the left or right to determine which deck is sent to the cue channel.
When the slider is in the center position, both decks will be sent to the cue channel.
26.
Cue Level
: Turn this knob to adjust the volume level of the cue channel.
27.
Cue Mix
: Turn to mix between the cue channel and program mix in the
headphone outputs
. When all
the way to the left, only the cue channel will be heard. When all the way to the right, only the program
mix will be heard.
28.
Channel Fader
: Move this fader to adjust the volume level of the corresponding deck.
29.
Crossfader
: Move this fader to mix between the decks.
30.
Main
: Turn this knob to adjust the output volume of the
main outs
. The meters next to this knob
indicate the signal’s volume level (reduce it if it begins "clipping," reaching the
red
part of the meter).
31.
Booth
: Turn this knob to adjust the output volume of the
Booth Outs
.
32.
Session Out
: Turn this knob to adjust the output volume of the
Session Outs
.
33.
Session In
: Turn this knob to adjust the input volume of the
Session Ins
.
34.
Session In Cue
: Press this button to send the signal from the
Session Ins
to the cue channel for
monitoring. When engaged, the button will be lit.
35.
Mic 1 Level
: Turn this knob to adjust the gain of the
Mic 1 Input
.
36.
Mic 1 Tone
: Turn this knob to adjust the balance of low (bass) and high (treble) frequencies of the
audio signal coming from the
Mic 1 Input
.
37.
Mic 1 On
/
Duck
: Press this to activate or deactivate the
Mic 1 Input
on the rear panel.
Press and hold this button for 2 seconds to activate the “ducking” feature, which reduces the volume
level of all other inputs by 10 dB. The button will flash when this feature is active. Press this button
once more to deactivate this feature and the
Mic 1 Input
. If you would like to edit the volume
threshold or the hold time for the mic ducking feature, you can do so in the Settings Menu. See
for more information.
38.
Mic 1 Echo
: Press this button to activate or deactivate the echo effect on the
Mic 1 Input
signal. Turn
the
Mic 1 Echo
knob on the front panel to adjust the amount of the effect. If you would like to edit the
amount of feedback for the mic echo feature, you can do so in the Settings Menu.
See
for more information.
Содержание SEVENTY
Страница 2: ...2 ...
Страница 84: ...dj rane com Manual Version 1 0 ...
