11
To change which Serato DJ Pro effect is applied to a deck in Software Effects mode
:
1.
Hold
Shift
and then press the
FX button
corresponding to the effect. The
FX button
will flash.
2.
Turn the
Parameter Knob
to scroll through effects.
3.
When the effect you’d like to apply is displayed, press the
Parameter Knob
. The
FX button
will stop
flashing.
Editing Live Effects on a Deck
The main
Display
screen will show the FX tempo for each deck, which will automatically match the tempo
of the song playing on the deck (unless you manually change this setting as described below). The
Display
will also show the FX beat division and depth level for each deck.
To change which deck is in focus on the Display
, push the
FX Joystick
left and right. The FX tempo field
for the deck in focus will be highlighted.
To edit a deck’s FX tempo
, turn the
Parameter Knob
or press the
Tap button
two or more times at the
desired BPM while the deck is in focus on the
Display
.
Note:
After you manually edit a deck’s FX tempo, the setting will not reset even after loading a new song to
the deck. To make a deck’s FX Tempo go back to automatically matching the tempo of the track loaded on
the deck, press the
Parameter Knob
or press and hold the
Tap button
for three seconds while the deck is
in focus on the
Display
.
To edit a deck’s FX beat division,
push the
FX Joystick
up or down while the deck is in focus on the
Display
.
To increase or decrease a deck’s FX depth level
, turn the
Depth Knob
for the deck.
To edit a Flex effect parameter while in Flex FX Mode
:
1.
Hold
Shift
and press the
FX button
for the effect. This will take you to the Flex effect parameter
Display
screen.
2.
Highlight the parameter you want to adjust with the
FX Joystick.
3.
Turn the
Parameter Knob
in order to adjust the parameter.
4.
Press the
Parameter Knob
to return to the main
Display
screen.
Note:
Changes made from the Flex effect parameter
Display
screen will not be saved upon powering off
Seventy. To learn how to change the default Flex FX parameters, see
.
Pad Modes
This chapter describes the different pad modes. Each deck
has eight pads, which are always in one of these modes,
and each deck’s pads can be in a different mode. Press
one of the
Pad Mode
buttons to enter the corresponding
pad mode on that deck. With each press, a
Pad Mode
button will alternate between a primary and secondary pad
mode. When you enter a primary pad mode, the
corresponding
Pad Mode
button will be lit with its primary
color. When you enter a secondary pad mode, the
corresponding
Pad Mode
button will be lit white, while the
other
Pad Mode
buttons will be lit red.
5
6
1 2
7 8
3 4
Содержание SEVENTY
Страница 2: ...2 ...
Страница 84: ...dj rane com Manual Version 1 0 ...