Manual Operation
R&S
®
UPV
126
Getting Started 1146.2078.62 ─ 09
With the R&S
UPV-B2 (digital audio interface) and -K22 options, the
digital interface
parameters
of DUTs at the AES/EBU or SPDIF interfaces, such as jitter, pulse ampli-
tude, scan frequency, etc., can also be analyzed.
The results of these different measurement functions can be displayed in various ways
in the
measurement windows
. The type of display, the units used, scaling, etc., can
be set differently for each measurement function in the associated panels.
The diagram below shows the function blocks and the analysis levels of the R&S
UPV:
Similar to the generator component, the analyzer component is operated in two stages:
1. Operation begins in the "Analyzer Config" panel with the selection of:
● analog or digital input connectors
● number of channels
● AC or DC coupling
● IF bandwidth
● and a number of other parameters
Functional Division of the Audio Analyzer