R&S TSMA6, Руководство пользователя

Страница: 42 / 155

Configuring the R&S TSMA6
R&S
®
TSMA6
42 User Manual 4900.8057.02 ─ 06
2. Configure the following settings.
● Workspace File
In the drop-down menu, select a ROMES workspace file (see "Import of
ROMES Workspace File" on page 43).
● Recording
Activating this checkbox, the ROMES measurement data are written to the
TSMA6 hard disk.
● IP Controlled
Activating this checkbox, the ROMES measurement can be controlled via IP
from an external host PC.
3. Click "Submit" to save your selection.
For more details about the R&S
®
ROMES configuration and usage, refer to the user
documentation for R&S
®
ROMES.
6.4 Import of Workspace Files (NESTOR, ROMES)
Import NESTOR workspace file
1. Start the R&S TSMA6 web GUI from the host PC (see Chapter 6.1.1, "Start the
R&S TSMA6 Web GUI" , on page 32).
2. Navigate to "Configuration" > "System" > "Mode" and set measurement mode to
"NESTOR Probe".
3. Press "Submit" and wait until the device is in "NESTOR Probe" mode. (In the sta-
tus bar, the entry is "No error".)
4. Navigate to "File Transfer" and press the "Browse..." button in the "Upload" section.
5. Search on the host PC for the NESTOR workspace file to be imported and confirm
the dialog with "Open".
6. Press "Upload".
Import of Workspace Files (NESTOR, ROMES)