R&S TSMA6, Руководство пользователя

Страница: 21 / 155

Preparing for Use
R&S
®
TSMA6
21 User Manual 4900.8057.02 ─ 06
To select the correct connectors, refer to Chapter 3.2, "Rear Panel View" , on page 12.
1. Connect the RF antenna to the RF IN connector (see Figure 3-2 - 14).
2. Connect the GPS antenna to the GPS ANT port (see Figure 3-2 - 4).
3. Connect mouse and keyboard to the USB 2.0 ports (see Figure 3-2 - 11) and a
monitor to the appropriate monitor port (HDMI, USB-C)) (see Figure 3-2 - 13, 9) if
you want to use local operation. (optional)
4. Connect a LAN cable to the LAN port if you want to use the R&S TSMA6 via
Remote Desktop or as distributed system (optional). (See Figure 3-2 - 12.)
5. OPTIONAL : Connect external devices/storage devices and test mobile phones to
USB 2.0 / USB 3.0 / USB-C ports (see Figure 3-2 - 9, 10, 11).
5.3 Connecting Power Supply
This section describes how to connect the R&S TSMA6 to a power supply unit.
5.3.1 Connecting to a Vehicle DC Power Supply
For 12V Vehicle DC Supply Only
The R&S TSMA6 is to be used with a 12 V vehicle power supply only.
Use the accessory DC cable with cigarette lighter adapter to power the R&S TSMA6
from the vehicle power supply. Connect the 7-pin connector to DC IN.
Connecting a proprietary power supply
► To use a proprietary DC supply with the R&S TSMA6 power cable, demount the
cigarette lighter adapter from the supplied power cable and connect the open ends
of the cable to the proprietary power supply. Be sure to respect the correct polarity
(see
Figure 5-1 ).
Connecting Power Supply