R&S SMCVB-K156, Руководство пользователя

Страница: 20 / 79

T-DMB/DAB Configuration and Settings
R&S
®
SMCVB-K156
20 User Manual 1179.1029.02 ─ 02
"External" Uses the external ETI signal present at the input connector.
Signal requirements:
●
ETI ( NI ), ETI (NA 5592) or ETI (NA 5376) signal
●
HDB3-coded
●
Nominal voltage level:
±
2.37 V
●
Internally terminated with a 75
Ω
load
●
Data rate: 2.048 Mbit/s
"TS Player" Uses an internal transport stream with ETI packet data played from a
file. The player requires no option.
Playing encrypted files with extension
_c
requires a stream library
option R&S SMCVB-KSx.
See also:
●
Chapter 4.7, "TS Player" , on page 31
●
Supported TS player file types
"Test Signal" Requires "Network > Network Mode > MFN".
Uses an internal ETI test signal with audio content.
Remote command:
[:SOURce<hw>]:BB:TDMB:SOURce
on page 52
Input
Requires "Source > External".
Sets the external input interface.
Remote command:
[:SOURce<hw>]:BB:TDMB:INPut
on page 51
Input Format
Requires "Source > External" and "Input > TS IN".
Displays the format of the input signal.
"ETI" Fixed input format.
Remote command:
[:SOURce<hw>]:BB:TDMB:INPut:FORMat
on page 51
IP ETI Channel
Requires "Source > External" and "Input > IP".
Selects the IP ETI channel. You can select one out of two IP ETI channels as input at
the "IP Data" interface.
To configure a particular channel, see Chapter 4.2.3, "IP Channnel x Settings" ,
on page 22.
Remote command:
[:SOURce<hw>]:BB:TDMB:INPut:ETIChannel
on page 51
ETI Signal
Displays, if a valid ETI signal is present and the signal type.
"Invalid" No ETI signals present.
"ETI (NI)" ETI NI signal.
Input Signal Settings