Instrument Tour
R&S
®
SGS100A
27
Getting Started 1416.0570.02 ─ 11
In standby state, the button is orange. In this state, it is safe to switch off the AC
power and disconnect the instrument from the power supply.
A blinking green color indicates that a booting operation is in process.
[RF ON]
The [RF ON] key switches the RF signal on or off. If activated, the button is
green.
[REF EXT]
The [REF EXT] LED indicates the status of the external reference.
●
Green indicates that the instrument can synchronize to the external clock.
●
Red indicates that the instrument cannot synchronize to the external clock.
●
No light indicates that the internal reference is used.
[ERROR / WARNING]
The [ERROR / WARNING] LED indicates the status of the R&S
SGS.
●
Red indicates that an error has occurred, e.g. temperature exceeded or power
failure.
●
Blinking orange indicates a running process (e.g calibration, self test).
●
No light indicates that no errors or warnings have occurred.
For details on errors or warnings, refer to the graphical user interface on a remote
PC ("SGMA-GUI > Info").
For more information, refer to the "Error Messages" section in the user manual.
[LAN]
The [LAN] key indicates if a LAN connection is established.
Front Panel Tour
