R&S QAR50, Руководство пользователя

Страница: 15 / 67

Preparing for use
R&S
®
QAR50
15 User Manual 1179.4992.02 ─ 02
1
2
Figure 4-3: Possible operation positions for the R&S QAR50
1 = Lying position
2 = Standing position
Instead of using the supporting feet, you can also integrate the R&S QAR50 in a pro-
duction line system. For these special setups, contact your Rohde & Schwarz repre-
sentative.
Attaching the supporting feet
The R&S QAR50 is delivered with a pair of feet that you can attach to the R&S QAR50.
All required parts (feet, screws and washers) are part of the delivery.
The supporting feet are bent at their ends to make the R&S QAR50 more stable. Make
sure to align the feet correctly with the bent parts facing away from the ends of the
main body.
Figure 4-4: Correct alignment of the supporting feet
After you have unpacked the R&S QAR50, it usually rests in lying position on the floor.
The way to attach the feet depends on the way you set up the R&S QAR50 (lying posi-
tion or upright position).
1. WARNING! Risk of physical injury caused by heavy items.. See "Lifting, carrying
and installing the product" on page 5.
Attaching the feet requires you to tilt the R&S QAR50 by 90° at least once.
Installing the R&S QAR50