manualshive.com logo in svg

R&S NRQ6, Начало работы, Страница: 7 / 61

Поделиться
Скачать
R&S NRQ6 Скачать руководство пользователя страница 7

Safety Information

R&S

®

NRQ6

7

Getting Started 1178.3705.02 ─ 07

1

 

Safety Information

The product documentation helps you use the R&S

 

NRQ6 safely and efficiently.

Follow the instructions provided here and in the printed "Basic Safety Instruc-
tions". Keep the product documentation nearby and offer it to other users.

Intended use

The R&S

 

NRQ6 is intended for the development, production and verification of

electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S

 

NRQ6 only for its designated purpose. Observe the

operating conditions and performance limits stated in the data sheet.

Where do I find safety information?

Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or dam-
age caused by dangerous situations. Safety information is provided as follows:

●

The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S

 

NRQ6.

●

Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.

Содержание NRQ6






























































Отзывы:

Нет отзывов