R&S NRQ6, Начало работы, Страница: 36 / 61

R&S NRQ6 Tour
R&S
®
NRQ6
36 Getting Started 1178.3705.02 ─ 07
(output). Also, you can supply an external reference signal and use it as refer-
ence clock instead of the internal reference signal (input).
For input and output specifications, read the label on the R&S NRQ6 casing and
the data sheet.
Further information:
●
For details on configuration, see the user manual.
5.7 Clock I/O (CLK)
See (7) in Figure 5-1 .
The female SMA connector is used as an input or output for the sampling clock.
By default, the R&S
NRQ6 generates its sampling clock internally. You can use
this signal for other devices (output).
If you supply the local oscillator signal externally, you can use an external signal
as sampling clock instead of the internal signal (input).
For input and output specifications, read the label on the R&S NRQ6 casing and
the data sheet.
Further information:
●
For details on configuration, see the user manual.
5.8 Local Oscillator I/O (LO)
See (8) in Figure 5-1 .
The female SMA connector is used as an input or output for the local oscillator
(LO) signal.
For input and output specifications, read the label on the R&S NRQ6 casing and
the data sheet.
Further information:
●
For details on usage and configuration, see the user manual.
Local Oscillator I/O (LO)