R&S NGL200 series Скачать руководство пользователя страница 38

Страница: 38 / 150

Operating Basics

R&S

NGL200

User Manual 1178.8736.02 ─ 02.01

Menus

Description

"Arb Editor"

Programs the waveform of voltage and current settings for the
channel output.

"Logging"

Data logging on the instrument timestamp, voltage and cur-
rent.

"Trigger"

Activates the trigger source for SCPI command (*TRG).

"User Button"

Configures the shortkey key action (screenshot, trigger, toggle
logging, reset statistics, toggle touch).

"File Manager"

File transfer function between instrument internal memory and
USB stick.

"Interfaces"

Configures the network (WLAN, Wireless LAN), USB interface
and GPIB address

"Screenshot"

Captures screen image of the instrument

"Licenses"

Displays license information and install license options.

"Appearance"

Configures brightness level for screen display and frontpanel
keys.

"Sound"

Enables/Disables sound when events occur.

"Data & Time"

Configures date, time and clock format of the instrument.

"Device Infos"

Displays instrument information.

"Update Device"

Performs firmware update on the instrument.

"Save/Recall Device Settings"

File management on the instrument settings.

Resets instrument settings with factory default.

"CSV Settings"

Configures the file formatting for CSV file.

"Digital Output"

Configures the output fault, output 1 and output 2.

Channel menu

The "Channel 1" or "Channel 2" menu provides access to settings on channel output,
channel trigger conditions and output limit settings.

1. Press [Home] key.

The R&S

NGL200 displays the home window.

2. Select the "Settings" button on Ch1 or Ch2 channel display area.

Alternatively, press [Settings] key to access "Channel 1" or "Channel 2" menu.

Menus

Description

"Over Current Protection (OCP)"

Configures OCP protection settings ("Blowing Delay", "Initial
Delay" and linking channel) for the instrument.

"Over Voltage Protection (OVP)"

Configures OVP protection settings (OVP level) for the instru-
ment.

Front Panel Keys

Содержание NGL200 series























































































































































Результаты поиска

Содержание NGL200 series

Отзывы:

R&S NGL200 series, Руководство пользователя, Страница: 38 / 150

Результаты поиска

Содержание NGL200 series

Отзывы: