R&S EDST300, Начало работы

Страница: 21 / 40

Instrument tour
R&S
®
EDST300
21 Getting Started 1179.5647.02 ─ 01
5.1.1 Power key
The [Power] key is located on the lower left corner of the front panel. It starts up
and shuts down the instrument.
See also "Connecting to power" on page 4 and Chapter 4.10, "Switching on or
off" , on page 18.
The status LEDs indicate the status of operation, see Table 4-1 .
5.1.2 System keys
System keys set the instrument to a predefined state, change basic settings, and
provide print and display functions.
A detailed description of the corresponding functions is provided in the
R&S
EDST300 user manual.
Table 5-1: SYSTEM keys
SYSTEM key Assigned functions
[PRESET] Resets the instrument to the default state.
[CAL] Starts a calibration on the R&S EDST300
[VOL] Volume control for audio output
[SAVE] for future use
[MEM]
[LOCAL] Switches between remote and local operation of the
R&S EDST300
[SETUP]
Provides basic instrument configuration functions, e.g.:
●
Reference frequency (external/internal), noise source
●
Date, time, display configuration
●
LAN interface
●
Self-alignment
●
Software update and enabling of options
●
Information about instrument configuration incl. software ver-
sion and system error messages
●
Service support functions (self test etc.)
Front panel view