R&S EDST300, Начало работы

Страница: 13 / 40

Preparing for use
R&S
®
EDST300
13 Getting Started 1179.5647.02 ─ 01
2. Always fold the feet completely in or out. With folded-out feet, do not place
anything on top or underneath the product.
3. CAUTION! A stack of products can fall over and cause injury. Never stack
more than three products on top of each other. Instead, mount them in a rack.
Stack as follows:
● If the products have foldable feet, fold them in completely.
● It is best if all products have the same dimensions (width and length). If the
products have different dimensions, stack according to size and place the
smallest product on top.
Left = Stacked correctly, same dimensions
Middle = Stacked correctly, different dimensions
Right = Stacked incorrectly, too many products
4. NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10
cm between the fan openings of the prod-
uct and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radia-
tors or other products.
4.4.2 Mounting the R&S EDST300 in a rack
If you use the product in a vehicle or in aircraft, install it in a rack provided for this
purpose. Secure the product safely so that it cannot fall out and hurt passengers
when the vehicle or aircraft is moving.
To prepare the rack
1. Observe the requirements and instructions in "Operating the product"
on page 4.
Setting up the product indoors