Preparing for use
R&S
®
ZCxxx
11
Getting Started 1177.5156.02 ─ 05
Signal input and output levels
Information on signal levels is provided in the data sheet. Keep the signal levels
within the specified ranges to avoid damage to the product and connected devi-
ces.
Preventing electrostatic discharge (ESD)
Electrostatic discharge is most likely to occur when you connect or disconnect a
DUT.
►
NOTICE!
Risk of electrostatic discharge. Electrostatic discharge can damage
the electronic components of the product and the device under test (DUT).
Ground yourself to prevent electrostatic discharge damage:
a) Use a wrist strap and cord to connect yourself to ground.
b) Use a conductive floor mat and heel strap combination.
3.5
Connecting the converter to the DC supply
The converter power supply R&S
ZCPS has been designed for use with convert-
ers of the R&S
ZCxxx family. Do not use other power supplies.
1. Switch the converter power supply R&S
ZCPS off.
2. Connect the R&S
ZCxxx to either output CONVERTER 1 or CONVERTER 2
of the R&S
ZCPS, using the enclosed DC supply cable.
3.6
Switching the converter on
Before switching on the connected converter power supply, make sure that the
following conditions are fulfilled:
●
Converter covers are in place and all fasteners are tightened.
●
Ventilation openings are unobstructed.
●
The converter is dry and does not show condensation.
Switching the converter on
