Safety and regulatory information
R&S
®
ZCxxx
5
Getting Started 1177.5156.02 ─ 05
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
Millimeterwave converters R&S
ZCxxx are designed to be used with Rohde &
Schwarz vector network analyzers R&S
ZNA, R&S
ZVA or R&S
ZVT. They are
intended for the development, production and verification of electronic compo-
nents and devices in industrial, administrative, and laboratory environments. Only
use them for their designated purpose. Observe the operating conditions and per-
formance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
Multilingual safety information is delivered with the converter power supply
R&S
ZCPS and your Rohde & Schwarz vector network analyzer.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Labels on the product
Labels on the casing inform about:
●
Product and environment safety
●
Identification of the product
Table 1-1: Labels regarding environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see
ing electrical and electronic equipment"
Labels on the product
