Rand McNally Intelliroute TND-710 страница 14 Скачать руководство пользователя

Страница: 14 / 150

Rand McNally IntelliRoute

TND

710 User’s Guide

Version 2.0.1

Device Safety

Caution:

Do not use sharp-edged objects on the device touch screen.

Caution:

The device is not waterproof and is not protected against water

damage.

Caution:

Protect the device from extreme temperatures. Operating

temperature for the device is between 32 degrees F and 120
degrees F.

Caution:

When parking the vehicle for an extended time, to avoid

battery drain, hold down the power button for 10 seconds to
power off the device. For shorter periods of inactivity, see “Enter
or Return from Standby (Sleep) Mode” on page 11.

Caution:

Do not open the navigation device casing.

Caution:

Do not attempt to replace the battery. For problems with the

battery, contact Rand McNally Customer Support.

Caution:

Always follow local regulations when disposing of this device.

Note:

Make sure that there are no kinks in the cable and that it will
not be damaged by any sharp objects.

Note:

Use only a moist cloth to clean the navigation device.

Note:

Do not pull the cable to unplug the unit.

Содержание Intelliroute TND-710























































































































































Результаты поиска

Содержание Intelliroute TND-710

Отзывы:

Похожие инструкции для Intelliroute TND-710

Бренды по названию

Популярные бренды

Rand McNally Intelliroute TND-710, Руководство пользователя

Результаты поиска

Содержание Intelliroute TND-710

Отзывы:

Похожие инструкции для Intelliroute TND-710

Бренды по названию

Популярные бренды