RANCHO RT-iSCSI-R, Руководство пользователя

Страница: 8 / 23

3.0 Configuring the iSCSI Bridge
Before the iSCSI Bridge can be used on the network for the first time, it is necessary to
configure a number of IP parameters. To make this as easy as possible we have provided the
iSCSI bridge with an inbuilt GUI interface that can be accessed via any web browser.
3.1 Initial set up
Connect the iSCSI Bridge to the SCSI peripherals and network as described in the previous
sections and power up the unit.
From within your web browser, connect to the ISCSI Bridge using the IP address 10.10.10.10
Depending on how the network parameters are set on the machine you are using to access
the iSCSI Bridge, if may be necessary to change your network setting on your computer for the
initial set up. See Appendix A and B for further help.
Once you have connected to the GUI interface you will see the entry page shown below.
Enter the default password and username
– admin, and admin.
Note: We suggest that you change your password at the next possible opportunity
– see
section 3.8
Page 8