RANCHO RT-iSCSI-R, Руководство пользователя

Страница: 10 / 23

3.3 Setting the IP Address
There are two possibilities when configuring the IP address of the iSCSI Bridge:
•
DHCP -this means the Bridge will seek out the DHCP sever on your network and
obtain an IP address from the server each time it powers up.
•
Static IP - the IP address set in this page will be the IP address the unit will use
each time it powers up.
Depending on your configuration, either click the DHCP button or set your Static IP address.
Note: if you select the DHCP mode, ensure your DHCP server is set to automatically
update the DNS server.
3.4 Setting the Subnet Mask
If the Bridge is configured to use DHCP the netmask will be issued from the DHCP server. If
you are using static IP address enter the IP mask in this box.
3.5 Setting the Broadcast Address
Enter in this box your Broadcast address for your network.
3.6 Committing the changes
Click the save button to save these parameters and then click the reboot option in the left hand
pane.
S
3.7 Reconnect to the Bridge
If you made changes to you computer, return them to their previous setting and reconnect to
the Bridge using the IP address or hostname, depending on which addressing mode you
selected.
3.8 Setting the Administration Password
This configuration page will allow the administrator to change the access password for the GUI
interface. From within the main menu select the Password and Security icon under the
Network section The GUI will now display the following window
Page 10