RANCHO RT-iSCSI-R, Руководство пользователя, Страница: 2 / 23

Warning
The Rancho iSCSI to SCSI Bridge contains no user-serviceable components. Only an
Authorized Service Centre should carry out any servicing or repairs. Unauthorized repairs or
modifications will immediately void your warranty.
Before you start
There are a number of additional pieces of equipment you will require for the successful
installation of your Bridge:
Ethernet Cable
You will require a good quality cable of suitable length to go between your network access
point and the iSCSI Bridge. This should be marked as certified to Cat 5e and have a RJ45
style connector at the Bridge end.
SCSI Cable
The greatest source of SCSI related faults are due to poor quality SCSI cabling. This is
especially true when running at the higher speeds possible with this iSCSI Bridge. We
therefore recommend that, you purchase a good quality SCSI 3 compatible cable with High
Density 68 way D type connectors for your installation.
You will also need to complete your SCSI bus installation with a SCSI Terminator. This is
connected to the last peripheral on the SCSI bus. Again we recommend you use a good
quality LVD / SE Terminator.
If you are in any doubt contact your reseller for extra assistance.
Page 2