ADC
Syntax:
adc
Description:
Reads and displays the current voltage from all ports equipped with an A/D converter.
For RS210, ports 1, 2, 3, 4, and 5 have A/D converters. Additionally, this command will
show internal battery voltage and temperature as A/D values.
Example:
1984>adc
Port 00, ADC ch17 = 2.35V (0788)
Port 01, ADC ch10 = 2.42V (07c1)
Port 02, ADC ch11 = 0.33V (0113)
Port 03, ADC ch12 = 0.26V (00db)
Port 04, ADC ch13 = 0.26V (00d7)
Port 05, ADC ch14 = 0.30V (00fa)
Port 06, ADC ch00 = 0.00V (0000)
Port 07, ADC ch00 = 0.00V (0000)
Port 08, ADC ch00 = 0.00V (0000)
Port 09, ADC ch00 = 0.00V (0000)
Port 10, ADC ch20 = 10.87V (03a5)
Port 11, ADC ch00 = 0.00V (0000)
Port 12, ADC ch00 = 0.00V (0000)
ASYNC
Syntax:
async
<portno>
Description:
The async command applies voltage to specified port and prints the resulting data on
signal line interpreted as 1200 baud TTL asynchronous serial data.
This command is especially helpful for debugging the Decagon 5TE sensors, which use
this form of communication.
BATT
Syntax:
batt
Description:
Displays the voltage level of the internal battery, as well as the current current draw in
mA (milli-Ampere). A negative current draw means that the battery is currently being
charged.
NOTE: Current measurement is a new feature as of 2010 model year.
See Also:
charger
Example:
1984>batt
Battery: 10.8V
Current: -32.1mA
Charger: on
16 © Ranch Systems LLC, 2005-2011. All Rights Reserved. Reproduction without permission from Ranch Systems is prohibited.
