9
The sealing ring can be removed by pulling upwards from the sealing ring rack in
sections. To install the sealing ring,
pressing it down into the rack section
by section. The sealing ring can be
installed on either side facing up.
Before the First Use
Remove and lnstall the Sealing Ring
Safe Lid Opening
Please note the following:
Prior to each use, inspect to make sure the sealing ring is well seated in the
sealing ring rack and the anti-block shield is mounted properly on the steam
release pipe.
After use, remove any foreign objects from the sealing ring and anti-block shield.
A sealing ring with cracks, cuts or other damages should not be used. A new
sealing ring replacement should be used.
Never pull the sealing ring by force, as the pulling may cause deformation and
affect its function in sealing the pressure.
Keep the sealing ring clean to avoid odor. Washing the sealing ring in warm
soapy water or dishwater can remove odor. However, it is normal for the sealing
ring to absorb the smell of certain acidic foods. That is why it is always a good
idea to have more than one sealing ring on hand.
1. Make sure the pressure cooking program has completed or press "Keep
warm/Cancel" key to terminate the program.
2. Releasing pressure in one of the following approaches.
Allow the cooker to cool down naturally until the float valve drops down. This may
take 10 to 15 minutes after cooking is finished and the cooker is in Keep-Warm
mode.
Putting a wet towel on the lid can speed up cooling.
Nature Release:
