Page 36
WES
3
Installation and Operations Manual V2.0 Ramtech Electronics Limited 2020
Once a unit has been added to a site group, the site name will be
displayed. Note: by default, this is ‘DEFAULT SITE’. Please ensure you
change it to reflect the location of your site, as this will be used in text
message alerts to identify the site where an alarm has been activated.
The following logs are accessible from the System Log menu:
• Fire Alarms
• Cancelled in delay
• System tests
• Medical Assist
• External Tampers
• Internal Tampers
• DT Head Tampers
• Low Signals
• Low Batteries
• Flat Batteries
• Latched Units
• Unit Removed
• Unit Missing
• Unexpected Unit
All logs are in the same format and are listed in chronological order
with the newest at the top of the list.
Each log entry starts with the date and time the event was logged,
followed by the unit number and type and then a + or – symbol to
indicate the raising (+) or clearing (-) of an event. If there is a down
arrow in the bottom right corner, there are further log entries which can
be displayed by pressing the down arrow on the navigation pad.
The example below shows the External Tamper Log where unit BASE
had an External Tamper raised at 11:20 on 7th June.
Exit the log display using the left arrow key on the navigation pad.
Logs can be cleared using the Clear All Logs option at the end of the
System Log Menu. This can only be performed by an authorised user
as it requires the access code.
System Logs
DEFAULT SITE
23/06/17 22:03
02 Minute Delay On
Prealarm mode - On
SYSTEM LOG MENU
> Alarms
Cancelled in d e l a y
System tests
SYSTEM LOG MENU
> Medical Assist
External Tampers
Internal Tampers
Advanced
Base Station Operation