RAMSET Twist Lok TM40, Инструкция по эксплуатации, Страница: 9 / 30

9
Technical Data
TS60P TS750P STRIKER
TM
Tool Weight 2.2kg 2.5kg 2.5kg
Overall Length Closed: 335mm 380mm 368mm
Open: 445mm 517mm 475mm
Maximum Width
48mm 48mm 48mm
Muzzle Diameter 30mm (with 20mm flats) 25 x 24mm 25mm
x 30mm (without Spall Shield) (without Spall
Shield)
60mm (with Spall Shield) 55mm (with Spall
Shield) NA
Maximum Fastener Capacity
With Standard Piston
60mm 85mm 40mm
Power Levels Green (low) Green (low) Green (low)
Yellow (medium) Yellow (medium) Yellow (medium)
Ramset tools, fasteners, charges and other
components of the Ramset Fastening System
are designed and manufactured as a complete
system. They provide the greatest ease,
convenience, all year round performance and
safety when used together. It is important that
you insist on genuine Ramset products for
utmost satisfaction and to ensure validity of your
warranty.
Tool Maintenance
To maintain the tool in good working condition it
is necessary to disassemble, clean and inspect
the tool regularly, in accordance with the local
regulations. A log book is available to record
this general maintenance program. To conform
with Australian Standards AS/NZ1873.1994 all
Powder Actuated Tools must be returned to
the manufacturer or an authorised agency for
a complete overhaul at least once in every
12 month period. This is a service which is
available at all Ramset offices.