RAMSET Twist Lok TM40 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 30

RAMSET Twist Lok TM40 Скачать руководство пользователя страница 14

14

Fasteners and Assemblies cont.

3.8MM DIAMETER SHANK FASTENERS cont.

ASSEMBLIES - WITH WASHERED/ANGLE CLIPS

Application Shank Washer Angle Hole Order No.
Length Diameter Clip Size

Concrete 25mm 16mm - - LWU25

Concrete 32mm 16mm - - LWU32

Concrete 75mm 16mm - - LWU75

●

Concrete 25mm - 25 x 25mm 8mm LAU25
Concrete 32mm - 25 x 25mm 8mm LAU32

●

TS750P only

COLLATED DRIVE PINS FOR USE IN TM40 MAGAZINE & STRIKER TOOL only

Application Shank Nominal Fixture Order No.
Length Thickness

Solid steel 14mm up to 2mm LDM14K

  Steel plate   16mm     up to 2mm       LDM16K
  Steel plate   18mm     up to 8mm       LDM18K
  Concrete    22mm     up to 1mm       LDM22
  Concrete    25mm     up to 3mm       LDM25
  Concrete    30mm     up to 8mm       LDM30
  Concrete    40mm     10 to 18mm         LDM40

INSULATION FASTENERS

* for use with special fastener guide

PA27624

-TS750P
PA27876 -TS60P

Application Insulation Material Order No.
Thickness

Concrete 38 - 40mm LF8040

Concrete 48 - 50mm LF8050
Concrete 73 - 75mm LF8075

ACCESSORIES

Description Order No.

Fastener Guide — Insulation Fasteners. TS750, TS750P PA27624

  Fastener Guide  — Insulation Fasteners. TS60P      PA27876
  Maintenance Kit         PA9333
  Tie Wire Couplings M6        REM06
  Tie Wire Couplings M8         REM08
  Tie Wire Couplings 1/4”       REW04
  3/8” Tube or Rod Clip (drilled)         RCC10C
  1/2” Conduit Clip (drilled)        RCC12C
  5/8” Conduit Clip (drilled)        RCC16C
  3/4” Conduit Clip (drilled)        RCC20C
  1” Conduit Clip (drilled)        RCC25C
  1 1/4” Conduit Clip (drilled)         RCC32C
  Couplings M6      RTCM06
  Couplings M8         RTCM08

«
...
12
13
14
15
16
...
»

Содержание Twist Lok TM40































Отзывы:

Нет отзывов