RAM Chassis CAB 4500 2016, Руководство пользователя

Страница: 199 / 228

Your authorized dealer will reset the oil change indicator message after completing
the scheduled oil change. If a scheduled oil change is performed by someone other
than your authorized dealer, the message can be reset by referring to the steps
described under “Instrument Cluster Warning Lights” in “What To Do In Emergen-
cies” in this guide or “Electronic Vehicle Information Center (EVIC)” or “Driver
Information Display (DID)” in “Understanding Your Instrument Panel” in your
Owner’s Manual on the DVD for further information.
Replace the engine oil and oil filter every 15,000 miles (24 000 km) or six months, or
sooner if prompted by the oil change indicator system. Under no circumstances should oil
change intervals exceed 15,000 miles (24 000 km) or six months, whichever comes first.
NOTE:
• Under no circumstances should oil change intervals exceed 15,000 miles
(24,000 km) or six months or 500 Hours, whichever comes first.
• Replace the engine oil and oil filter every 12,500 miles (20 000 km) when
running B20 fuel (Chassis Cab Only).
If Chassis Cab models and Pickup models configured with optional B20 capability
are operated with greater than 5% levels of Biodiesel, the oil change interval must
not exceed 12,500 miles (20 000 km) under any circumstances. See the Fuel
Requirements section for more information regarding operation of Chassis Cab
models and Pickup models configured for use with Biodiesel blend (B6-B20) fuel
meeting ASTM specification D-7467.
Perform Service Indicator — Cummins Diesel
Your vehicle will require emissions maintenance at a set interval. To help remind you
when this maintenance is due, the Electronic Vehicle Information Center (EVIC) or
Driver information Display (DID) will display “Perform Service”. When the “Perform
Service” message is displayed on the EVIC/DID it is necessary to have the emissions
maintenance performed. Emissions maintenance may include replacing the Closed
Crankcase Ventilation (CCV) filter element. The procedure for clearing and resetting
the “Perform Service” indicator message is located in the appropriate Service
Information.
M A I N T A I N I N G Y O U R V E H I C L E
197