RAM Chassis CAB 4500 2016, Руководство пользователя

Страница: 32 / 228

NOTE:
• The rear center head restraint (Crew Cab and Quad Cab) has only one adjustment
position that is used to aid in the routing of a tether. Refer to “Occupant
Restraints” in “Things to Know Before Starting Your Vehicle” in the Owner's
Manual on the DVD.
• Do not reposition the head restraint 180 degrees to the incorrect position in an
attempt to gain additional clearance to the back of the head.
WARNING!
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the
occupants. Follow the re-installation instructions above prior to operating the
vehicle or occupying a seat.
FRONT SEATS
Driver's Power Seat — If Equipped
Some models may be equipped with an eight-way power driver's seat. The power seat
switches are located on the outboard side of the driver's seat cushion. There are two
power seat switches that are used to control the movement of the seat cushion and
the seatback.
Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward
and rearward. Push the seat switch for-
ward or rearward. The seat will move in
the direction of the switch. Release the
switch when the desired position has
been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted
up or down. Pull upward or push down-
ward on the seat switch. The seat will
move in the direction of the switch. Re-
lease the switch when the desired posi-
tion is reached.
Power Seat Switches
1 — Power Seat Switch
2 — Recline Switch
3 — Power Lumbar Switch
G E T T I N G S T A R T E D
30