RAM Chassis CAB 4500 2016, Руководство пользователя

Страница: 23 / 228

LATCH System Weight Limit
You may use the LATCH anchorage system until the combined weight of the child and
the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor instead of
the LATCH system once the combined weight is more than 65 lbs (29.5 kg).
Locating LATCH Anchorages
The lower anchorages are round bars that are found at the rear of the seat cushion
where it meets the seatback. They are just visible when you lean into the rear seat to
install the child restraint. You will easily feel them if you run your finger along the gap
between the seatback and seat cushion.
Locating Tether Anchorages
In addition, Regular Cab models have
tether strap anchorages
behind the
front center and right seats. Crew Cab
models have tether strap anchorages
located behind each of the rear seats.
Center Seat LATCH (Crew Cab
Full And Standard Bench)
Do not install a child restraint in the
center position using the LATCH system.
Use the seat belt and tether anchor to
install a child seat in the center seating
position.
Center Seat LATCH (Crew Cab Split Bench)
If a child restraint installed in the center position blocks the seat belt webbing or
buckle for the outboard position, do not use that outboard position. If a child seat in
the center position blocks the outboard LATCH anchors or seat belt, do not install a
child seat in that outboard position.
1 — Lower Anchors
G E T T I N G S T A R T E D
21