RAM Commercial PROMASTER 2020 Скачать руководство пользователя страница 96

Страница: 96 / 260

STARTING AND OPERATING

NOTE:

Swivel seats that are unlocked can also prevent

the transmission gear selector from being

moved out of the PARK position. To shift the

transmission out of the PARK position the first

time after cranking is allowed, ensure swivel

seats are locked in the forward facing position.

Six-Speed Automatic Transmission

The transmission gear position display (located

in the instrument cluster) indicates the

transmission gear range. You must press the

brake pedal to move the gear selector out of

PARK (Refer to “Brake/Transmission Shift

Interlock System” in this section). To drive,

move the gear selector from PARK or NEUTRAL

to the DRIVE position.
The electronically-controlled transmission

provides a precise shift schedule. The

transmission electronics are self-calibrating;

therefore, the first few shifts on a new vehicle

may be somewhat abrupt. This is a normal

condition, and precision shifts will develop

within a few hundred miles (kilometers).

Gear Selector

Only shift from DRIVE to PARK or REVERSE

when the accelerator pedal is released and the

vehicle is stopped. Be sure to keep your foot on

the brake pedal when shifting between these

gears.
The transmission gear selector provides PARK,

REVERSE, NEUTRAL, DRIVE, and Electronic

Range Select (ERS) shift positions. Manual

downshifts can be made using the ERS shift

control. Moving the gear selector into the ERS

(-/+) position (beside the DRIVE position)

activates ERS mode, displays the current gear

in the instrument cluster, and prevents

automatic upshifts beyond this gear. In ERS

mode, toggling the gear selector forward (-) or

rearward (+) will change the highest available

gear. Refer to "Electronic Range Select (ERS)

Operation" in this section for further

information.

NOTE:

If the gear selector cannot be moved to the

PARK, REVERSE, or NEUTRAL position (when

pushed forward) it is probably in the ERS (+/-)

position (beside the DRIVE position). In ERS

mode, the transmission gear limit (1, 2, 3, etc.)

is displayed in the instrument cluster. Move the

gear selector to the right (into the DRIVE [D]

position) for access to PARK, REVERSE, and

NEUTRAL.

Gear Ranges

Do not depress the accelerator pedal when

shifting from PARK or NEUTRAL into another

gear range.

NOTE:

After selecting any gear range, wait a moment

to allow the selected gear to engage before

accelerating. This is especially important when

the engine is cold.

20_VF_OM_EN_USC_t.book Page 94

Содержание PROMASTER 2020





































































































































































































































































Результаты поиска

Содержание PROMASTER 2020

Отзывы:

Похожие инструкции для PROMASTER 2020

Бренды по названию

Популярные бренды

RAM Commercial PROMASTER 2020, Руководство пользователя

Результаты поиска

Содержание PROMASTER 2020

Отзывы:

Похожие инструкции для PROMASTER 2020

Бренды по названию

Популярные бренды