226
MULTIMEDIA
travel, change the 2D and 3D default settings.
Refer to “Settings” within this section for more
information.
NOTE:
When you have planned a route and the 3D
guidance view is shown, select the switch view
button to change to the map view and use the
interactive features.
Guidance View
1 — Switch View Button
Select the Switch View button to change
between the map view and the guidance view.
2 — Instruction Panel
Press this button to view the following
information:
The direction of your next turn
The distance to your next turn
Lane guidance at some intersections
3 — Route Bar
The Route Bar is shown when you have planned
a route. The Route Bar contains arrival
information, such as the estimated time of
arrival, the length of time to drive to the
destination from your current location, and
information about the next stop, if you have
stops on your route. The bottom of the Route
Bar represents your current location and shows
the distance to the next stop on your route.
4 — Current Location
This symbol shows your current location. Press
this symbol, or the speed panel, to mark your
current location.
5 — Speed Panel
Press this button to view the following
information (if available):
The speed limit at your location
The name of the street you are driving on
NOTE:
If you drive more than 3 mph (5 km/h) over the
speed limit, the Speed Panel turns red. If you
drive less than 3 mph (5 km/h) over the speed
limit, the Speed Panel turns orange.
6 — Main Menu Button
Press the Main Menu Button to show the Main
Menu.
7 — Zoom Buttons
Press the zoom in + button to zoom in and the
zoom out – button to zoom out.
20_VF_OM_EN_USC_t.book Page 226
Содержание PROMASTER 2020
Страница 44: ...42 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster 20_VF_OM_EN_USC_t book Page 42 ...
Страница 257: ......
Страница 258: ......