RAM Commercial PROMASTER 2020 Скачать руководство пользователя страница 184

Страница: 184 / 260

182

SERVICING AND MAINTENANCE

(Continued)

recommended or select a non-abrasive,

non-acidic cleaner for aluminum or chrome

wheels.

NOTE:

If you intend parking or storing your vehicle for

an extended period after cleaning the wheels

with wheel cleaner, drive your vehicle and apply

the brakes to remove the water droplets from

the brake components. This activity will remove

the red rust on the brake rotors and prevent

vehicle vibration when braking.

Dark Vapor Chrome, Black Satin Chrome, or

Low Gloss Clear Coat Wheels

Tire Chains And Traction Devices

Use of traction devices require sufficient

tire-to-body clearance. Due to limited clearance

the following traction devices are

recommended. Follow these recommendations

to guard against damage.



Traction device must be of proper size for the

tire, as recommended by the traction device

manufacturer.



No other tire sizes are recommended for use

with a tire chain or traction device.



Install on front tires only.



For LT225/75R16 and 215/75R16C tires

use of a Quality Chain Corp Light Truck

Highway Service (Non-Cam) tire chain or

equivalent snow traction device is recom

mended.

CAUTION!

Do not use scouring pads, steel wool, a bristle

brush, metal polishes or oven cleaner. These

products may damage the wheel's protective

finish. Such damage is not covered by the

New Vehicle Limited Warranty. Only car wash

soap, Mopar Wheel Cleaner or equivalent is

recommended.

CAUTION!

If your vehicle is equipped with these

specialty wheels, DO NOT USE wheel

cleaners, abrasives, or polishing compounds.

They will permanently damage this finish and

such damage is not covered by the New

Vehicle Limited Warranty. HAND WASH ONLY

USING MILD SOAP AND WATER WITH A SOFT

CLOTH. Used on a regular basis; this is all that

is required to maintain this finish.

WARNING!

Using tires of different size and type (M+S,

Snow) between front and rear axles can

cause unpredictable handling. You could lose

control and have a collision.

CAUTION!

To avoid damage to your vehicle or tires,

observe the following precautions:



Because of restricted traction device clear

ance between tires and other suspension

components, it is important that only trac

tion devices in good condition are used.

Broken devices can cause serious damage.

Stop the vehicle immediately if noise

occurs that could indicate device breakage.

Remove the damaged parts of the device

before further use.

20_VF_OM_EN_USC_t.book Page 182

Содержание PROMASTER 2020





































































































































































































































































Результаты поиска

Содержание PROMASTER 2020

Отзывы:

Похожие инструкции для PROMASTER 2020

Бренды по названию

Популярные бренды

RAM Commercial PROMASTER 2020, Руководство пользователя

Результаты поиска

Содержание PROMASTER 2020

Отзывы:

Похожие инструкции для PROMASTER 2020

Бренды по названию

Популярные бренды