RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя

Страница: 492 / 516

490

MULTIMEDIA

Voice Text Reply — If Equipped

Uconnect announces incoming text messages.

Push the VR button on the steering wheel or
Phone button (if enabled) and say “Listen.”

(Must have compatible mobile phone paired to

Uconnect system.)

1. Once an incoming text message is read to

you, push the VR button or Phone button

(if enabled). After the beep, say: “Reply.”

2. Listen to the Uconnect prompts. After the

beep, repeat one of the pre-defined

messages and follow the system prompts.

NOTE:

Only use the numbering listed, otherwise the

system does not transpose the message.

TIP:

Your mobile phone must have the full imple

mentation of the Message Access Profile (MAP)

to take advantage of this feature. For details

about MAP, visit

UconnectPhone.com

Apple® iPhone® iOS 6 or later supports reading

incoming text messages only.

TIP:

Voice Text Reply is not compatible with

iPhone®, but if your vehicle is equipped with

Siri® Eyes Free, you can use your voice to send

a text message.

PRE-DEFINED VOICE TEXT REPLY

RESPONSES

Yes.

Stuck in

traffic.

See you later.

No.

Start without

me.

I’ll be late.

Okay.

Where are

you?

I will be 5 <or

10, 15, 20,

25, 30, 45,

60> minutes

late.

Call me.

Are you there

yet?

I’ll call you

later.

I need

directions.

See you in 5

<or 10, 15,

20, 25, 30,

45, 60>

minutes.

I’m on my

way.

Can’t talk

right now.

I’m lost.

Thanks.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 490

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды

RAM Commercial CHASSIS CAB 2020, Руководство пользователя

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды