RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя страница 27

Страница: 27 / 516

GETTING TO KNOW YOUR VEHICLE

(Continued)

If the vehicle security alarm is armed and the

battery becomes disconnected, the vehicle

security alarm will remain armed when the

battery is reconnected; the exterior lights will

flash, and the horn will sound. If this occurs,

disarm the vehicle security alarm.

Rearming Of The System

If something triggers the alarm, and no action is

taken to disarm it, the vehicle security alarm will

turn the horn off after 29 seconds, 5 seconds

between cycles, up to 8 cycles if the trigger

remains active and then the vehicle security

alarm will rearm itself.

Security System Manual Override

The vehicle security alarm will not arm/disarm if

you lock/unlock the doors using the manual

door lock.

DOORS

Manual Door Locks

Front and rear doors may be locked by moving

the lock knob down. The lock knobs will unlock

when the interior handle is used to open the

doors.

Door Lock Knob

Front doors may be opened with the inside door

handle without lifting the lock knob.
Doors locked before closing will remain locked

when closed.
The emergency key will unlock the driver door

lock on your vehicle.

WARNING!



Do not leave children or animals inside

parked vehicles in hot weather. Interior

heat build-up may cause serious injury or

death.



For personal security and safety in the

event of an collision, lock the vehicle doors

as you drive as well as when you park and

leave the vehicle.



Before exiting a vehicle, always shift the

automatic transmission into PARK, apply

the parking brake, turn the vehicle OFF,

remove the key fobs from vehicle, and lock

all doors. and lock your vehicle.



Never leave children alone in a vehicle, or

with access to an unlocked vehicle. Leaving

children in a vehicle unattended is

dangerous for a number of reasons. A child

or others could be seriously or fatally

injured. Children should be warned not to

touch the parking brake, brake pedal or the

gear selector.



Allowing children to be in a vehicle unat

tended is dangerous for a number of

reasons. A child or others could be seriously

or fatally injured. Children should be

warned not to touch the parking brake,

brake pedal or the gear selector.

WARNING!

(Continued)

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 25

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

RAM Commercial CHASSIS CAB 2020, Руководство пользователя, Страница: 27 / 516

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы: