RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя

Страница: 236 / 516

234

STARTING AND OPERATING

Activating Adaptive Cruise Control (ACC)

You can only engage ACC if the vehicle speed is

above 0 mph (0 km/h).
The minimum set speed for the ACC system is

20 mph (32 km/h).
When the system is turned on and in the ready

state, the instrument cluster display will read

“ACC Ready.”
When the system is off, the instrument cluster

display will read “Adaptive Cruise Control (ACC)

Off.”

NOTE:

You cannot engage ACC under the following

conditions:



When in Four-Wheel Drive Low.



When you apply the brakes.



When the parking brake is applied.



When the automatic transmission is in PARK,

REVERSE or NEUTRAL.



When the vehicle speed is outside of the

speed range.



When the brakes are overheated.



When the driver door is open at low speed.



When the driver seat belt is unbuckled at low

speed.



Electronic Stability Control (ESC) Full Off

mode is active.

To Activate/Deactivate

Push and release the Adaptive Cruise Control

(ACC) on/off button. The ACC menu in the

instrument cluster displays “ACC Ready.”

Adaptive Cruise Control Ready

To turn the system off, push and release the

Adaptive Cruise Control (ACC) on/off button

again. At this time, the system will turn off and

the instrument cluster display will show “Adap

tive Cruise Control (ACC) Off.”

Adaptive Cruise Control Off

WARNING!

Leaving the Adaptive Cruise Control (ACC)

system on when not in use is dangerous. You

could accidentally set the system or cause it

to go faster than you want. You could lose

control and have a collision. Always leave the

system off when you are not using it.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 234

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды

RAM Commercial CHASSIS CAB 2020, Руководство пользователя

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды