RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя

Страница: 166 / 516

164

SAFETY

Children Too Large For Booster Seats

Children who are large enough to wear the

shoulder belt comfortably, and whose legs are

long enough to bend over the front of the seat

when their back is against the seatback, should

use the seat belt in a rear seat. Use this simple

5-step test to decide whether the child can use

the vehicle’s seat belt alone:

1. Can the child sit all the way back against

the back of the vehicle seat?

2. Do the child’s knees bend comfortably over

the front of the vehicle seat – while the child

is still sitting all the way back?

3. Does the shoulder belt cross the child’s

shoulder between the neck and arm?

4. Is the lap part of the belt as low as possible,

touching the child’s thighs and not the

stomach?

5. Can the child stay seated like this for the

whole trip?

If the answer to any of these questions was “no,

” then the child still needs to use a booster seat

in this vehicle. If the child is using the lap/

shoulder belt, check seat belt fit periodically

and make sure the seat belt buckle is latched.

A child’s squirming or slouching can move the

belt out of position. If the shoulder belt contacts

the face or neck, move the child closer to the

center of the vehicle, or use a booster seat to

position the seat belt on the child correctly.

WARNING!

Never allow a child to put the shoulder belt

under an arm or behind their back. In a crash,

the shoulder belt will not protect a child

properly, which may result in serious injury or

death. A child must always wear both the lap

and shoulder portions of the seat belt

correctly.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 164

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды

RAM Commercial CHASSIS CAB 2020, Руководство пользователя

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды