RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя страница 29

Страница: 29 / 516

GETTING TO KNOW YOUR VEHICLE

To Unlock From The Driver's Side:
With a valid Passive Entry key fob within 5 ft

(1.5 m) of the driver door handle, grab the front

driver door handle to unlock the driver's door

automatically. The interior door panel lock knob

will raise when the door is unlocked.

Grab The Door Handle To Unlock

NOTE:

If “Unlock All Doors 1st Press” is programmed,

all doors will unlock when you grab hold of the

front driver’s door handle. To select between

“Unlock Driver Door 1st Press” and “Unlock All

Doors 1st Press,” refer to “Uconnect Settings”

in “Multimedia” for further information.

To Unlock From The Passenger Side:
With a valid Passive Entry key fob within 5 ft

(1.5 m) of the passenger door handle, grab the

front passenger door handle to unlock all doors

automatically. The interior door panel lock knob

will raise when the door is unlocked.

NOTE:

All doors will unlock when the front passenger

door handle is grabbed regardless of the

driver’s door unlock preference setting (“Unlock

Driver Door 1st Press” or “Unlock All Doors 1st

Press”).

Preventing Inadvertent Locking Of Passive Entry

Key Fob In Vehicle:
To minimize the possibility of unintentionally

locking a Passive Entry key fob inside your

vehicle, the Passive Entry system is equipped

with an automatic door unlock feature which

will function if the ignition switch is in the OFF

position.
If one of the vehicle doors is open and the door

panel switch is used to lock the vehicle, once all

open doors have been closed the vehicle

checks the inside and outside of the vehicle for

any valid Passive Entry key fobs. If one of the

vehicle's Passive Entry key fobs is detected

inside the vehicle, and no other valid Passive

Entry key fobs are detected outside the vehicle,

the Passive Entry System automatically unlocks

all vehicle doors and chirps the horn three times

(on the third attempt ALL doors will lock and the

Passive Entry key fob can be locked in the

vehicle).
To Lock The Vehicle’s Doors:
With one of the vehicle’s Passive Entry key fobs

within 5 ft (1.5 m) of the driver or passenger

front door handles, push the door handle lock

button to lock all doors.

Push The Door Handle Button To Lock

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 27

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

RAM Commercial CHASSIS CAB 2020, Руководство пользователя, Страница: 29 / 516

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы: