Ralink 300N, Руководство пользователя

Страница: 58 / 85

51
6. You can click „Detail‟ button to see detailed information of connected
access point. If you wish to save this connection as a profile, you can
click „Export Profile‟ button, and this connection will be saved. You
can find this connection in „Profile‟ tab in a later time.
7.
Sometime WPS may fail (In the following picture, WPS pairing is
failed because no WPS-enabled access point is found):
You can click „PBC‟ button few more times to try again. When an
access point is connected, you can click „Disconnect‟ to disconnect
your wireless network card from a connected access point, or select
another WPS-enabled wireless access point, then click „Connect‟ to
establish connection to selected access point, if there are more than
one WPS-enabled access point found. You can also click „Rotate‟
button, and next access point on the list will be selected to establish
connection.
If you want to delete a found access point from the list, select it and
click „Delete‟ button.