English–
2
0 276 001 X45 | (28.9.11)
Bosch eBike Systems
Indication Elements, Drive HMI
a
Speed indication
b
Light indicator
c
Assistance-level indicator
d
Start-assistance indicator
e
Multi-function indicator
f
Assistance-mode and error code indicator
g
Battery charge control indicator
Technical Data
Assembly
Inserting and Removing the Battery
For inserting and removing the battery in/from
the the eBike, please read and observe the bat-
tery operating instructions.
Positioning the Holder of the Drive HMI
f
Tighten screws 10 and 9 with a tightening
torque of 1 Nm (max.).
Otherwise, the hold-
er
2
can become damaged.
Moving/Tilting the Holder (see figure A)
Loosen both screws
9
on the bottom side of
holder
2
. Move the holder on the handlebar or
change the holder angle. Retighten both screws
9
again with a tightening torque of 1 Nm (max.).
Turning the Holder (see figure B)
Loosen screw
10
on the top side of holder
2
.
Turn the top part of the holder in such a manner
that the drive HMI
1
is well in your view after in-
serting it (see “Inserting and Removing the Drive
HMI”). Retighten screw
10
again with a tighten-
ing torque of 1 Nm (max.).
Inserting and Removing the Drive HMI
(see figure C)
To
insert
the drive HMI, place it turned by approx.
30° onto holder
2
and then turn it clockwise to
the stop.
To
remove
the drive HMI, turn it approx. 30°
anticlockwise and pull it out of the holder
2
.
f
Remove the drive HMI when parking the
eBike, so that the drive cannot be used by
unauthorised persons.
Without the drive
HMI, the drive cannot be switched on.
Drive Unit
Drive Unit 45
Article number
0 275 007 003
Rated continuous
output
W
350
Output torque, max.
Nm
50
Rated voltage
V=
36
Operating
temperature
°C
–5...+40
Storage temperature
°C
–10...+50
Degree of protection
IP 54 (dust and
splash water
protected)
Weight, approx.
kg
4
Drive HMI
HMI
Article number
1 270 020 900
Operating
temperature
°C
–5...+40
Storage temperature
°C
–10...+50
Degree of protection
IP 54 (dust and
splash water
protected)
Weight, approx.
kg
0.15
Lighting*
Rated voltage
V=
6
Power output
– Front light
– Rear light
W
W
2.7
0.3
* Not possible via the eBike battery in all country-spe-
cific versions, depending on the statutory regulations
OBJ_BUCH-1557-001.book Page 2 Wednesday, September 28, 2011 11:39 AM
Содержание ebike
