Documentation Center
Accessing the Internet
Assuming you have successfully logged into your Gateway using SSH. Enter the following command in the
command line:
You will now then see a page like the following picture below:
Figure 11: Configuration Options for the Gateway
1. Set pi password - used to set/change the password of the Gateway.
2. Set up RAK Gateway LoRa Concentrator - used to configure the frequency, which the Gateway will operate
on, and the LoRaWAN Server which the Gateway will work with.
3. Restart packet -forwarder - used to restart the LoRa packet forwarded process.
4. Edit packet-forwarder config- used to open the global_conf.json file, in order to edit LoRaWAN parameters
manually.
5. Configure Wifi - used to configure the Wi-Fi settings in order to connect to a network.
6. Configure LAN - used to configure the Ethernet adapter settings.
Connect through Wi-Fi
If you want to connect through Wi-Fi, it can easily be done with the Wireless capabilities of the Raspberry Pi 4 by
choosing "5 Configure WIFI". By default, the RAK7244 WisGate Developer D4 Gateway works in Wi-Fi AP Mode.
In order for the Gateway to connect to the router, it must work in Wi-Fi Client Mode.
sudo
gateway-config
sh
