Documentation Center
Figure 36: Registering your Gateway
Gateway EUI - refers to the Gatway ID you obtained from the previous steps. In case you forgot, just type
gateway-version
in the command line. This must be the same with the Gateway's True Gateway ID
otherwise you will fail to register your Gateway on TTN.
Figure 37: RAK7244 - LPWAN Developer Gateway ID in SSH
📝
NOTE:
Make sure to select the "I'm using the legacy packet forwarder" check box.
Description - A human readable description of your Gateway.
Frequency Plan - This is the frequency you want to use and it must be the same with Gateway and the Node.
Router - The router this gateway will connect to. To reduce latency, pick a router that is in a region which is
close to the location of the gateway.
Location - Choose the location of the Gateway by entering its coordinates. This is reflected on the Gateway
World Map.
Antenna Placement - Where is your antenna placed? Is it placed indoors or outdoors?
Click Register Gateway and wait for a couple of minutes . If the status of your gateway is Connected,
Congratulations!
🎉
Your gateway is now connected to the The Things Network (TTN).