Raisecom Technology Co., Ltd
79
10.16.1. Cross
Set
In cross set menu press number key 1 to configure the cross connect:
Input Group Number (1-8):
First input the cross group number:
First Channel:
There are two parts of configured data for each channel: a group number and a channel
number (there must be space between the two numbers) such as:
1 1, 0 0 indicates
deleting the cross connection of this channel.
Press ENTER for the configuration of the
next channel (for unfinished entering you cannot start to configure the next channel and
the invalid data will be discarded).
Second Channel:
Press ENTER to confirm configuration (or skip that channel’s configuration and the old
value will be reserved), press E key to finish configuration, and ESC to cancel
configuration.
10.16.2.
Create Group Cross
In cross set menu press number key 2 to create group cross:
Group No. for Time Slot Out:
The entering must be a number from 1 to 8, press ENTER to confirm and start the
configuration of next item. The system will check the entered number, if invalid it will be
discard; if valid there will be next item configuration.
Time Slot Start No. for Time Slot Out:
The entering must be a number from 1 to 31, press ENTER to confirm and start the
configuration of next item. The system will check the entered number; if invalid it will be
discard; if valid there will be next item configuration.
Group No. for Time Slot In:
The entering must be a number from 1 to 8, press ENTER to confirm and start the
configuration of next item. The system will check the entered number; if invalid it will be
discard; if valid there will be next item configuration.
Time Slot Start No. for Time Slot In:
The entering must be a number from 1 to 31, press ENTER to confirm and start the
configuration of next item. The system will check the entered number; if invalid it will be
discard; if valid there will be next item configuration.
Time Slot Number for Create Cross:
The entering must be a number from 1 to 31, press ENTER to confirm and start the
configuration of next item. The system will check the entered number; if invalid it will be
discard; if valid there will be next item configuration.
Create Mode:Uni-direction
In this statu use
→
to change the configured value: Uni-direction & Bi-direction, press
ENTER to confirm and start the configuration of next item.
Deal Mode for Old Relation Data:Retain
