RAIS/attika NEXO 100 Classic Gas Скачать руководство пользователя

Страница: 48 / 88

PROGRAM MODE

ON:

Press the button

OFF

is displayed.

NB!

The temperature set for Thermostatic mode is

the temperature for the operating time in Program

mode. If the time set for Thermostatic mode is

changed, the temperature for the operating time in

Program mode also changes.

OFF:

1. Press on the or or

button to enter Manual

mode.

2. Press on the button to

enter Thermostatic mode.

Default setting:

OPERATING TIME (thermostatic mode) TEMPERA-

TURE: 21 °C (70 °F)

TEMPERATURE FOR TURNING OFF ”--” (only pilot

light)

SETTING THE TEMPERA-

TURE:

1. Press the button and

hold it down until flash-

es.

and the temperature

set (setting in Thermostatic

mode) are displayed.

2. Continue by pressing the

button or waiting. ,

OFF

is displayed and temperature

flashes.

3. Select temperature

at which to shut down

by pressing on the or

button.

4. This is confirmed by press-

ing on the button.

NB!

The temperature set (Thermostatic mode) and

temperature for shutting down are the same for each

day.

SETTING THE DAY:

ALL

flashes. Press the

or button to select

from

ALL

SA:SU

6. This is confirmed by press-

ing on the button.

SETTING TIME FOR TURN-

ING OFF

(PROGRAM 1):

12. ,

OFF

is displayed,

ALL

is displayed briefly and

HOUR

flashes.

13. Select hour by pressing

on the or button.

14. This is confirmed by

pressing on the button. ,

OFF

is displayed,

ALL

displayed briefly and

Min-

utes

flashes.

15. Select minutes by press-

ing on the or button.

16. This is confirmed by

pressing on the button.

NB!

Either continue to PROGRAM 2 and set oper-

ating time and time for shutting down or stop pro-

gramming here. PROGRAM 2 remains deactivated.

NB!

PROGRAMS 1 and 2 use the same operating

temperature (Thermostatic mode) and temperature

for shutting down for ALL, SA:SU and Daily Timer (1,

2, 3, 4, 5, 6, 7) When a new operating temperature

(Thermostatic mode) and temperature for shutting

down have been set, this temperature will become

the new default setting.

NB!

If ALL, SA:SU or Daily Timer are programmed for

operating temperature and temperature for shutting

down for PROGRAM 1 and PROGRAM 2, these will

become the new default times. The batteries must

be removed to clear temperatures, operating times

and times for shutting down for PROGRAM 1 and

PROGRAM 2.

SETTING OPERATING TIME

(PROGRAM 1):

7. ,

1, ON

is displayed,

ALL

is displayed briefly and

HOUR

flashes.

8. Select hour by pressing on

the or button.

9. This is confirmed by press-

ing on the button.

is displayed,

ALL

is displayed briefly and

Minutes

flashes.

10. Select minutes by press-

ing on the or button.

11. This is confirmed by

pressing on the button.

ALL is selected.

Содержание NEXO 100 Classic Gas

























































































Результаты поиска

Содержание NEXO 100 Classic Gas

Отзывы:

Похожие инструкции для NEXO 100 Classic Gas

Бренды по названию

Популярные бренды

RAIS/attika NEXO 100 Classic Gas, Руководство пользователя

Результаты поиска

Содержание NEXO 100 Classic Gas

Отзывы:

Похожие инструкции для NEXO 100 Classic Gas

Бренды по названию

Популярные бренды