TROUBLESHOOTING
- 23 -
Problem
Possible Cause
Possible Solution
Can't turn on /off the valve
Inaccurate water flow meter
Timer won't connect
Low battery
Impurities in water inlet
Unstable network or delayed
response.
Inaccurate statistics due to tilted
mounting angle.
Low or erratic water pressure
from the tap
Replace fresh batteries
Regularly clean the filter port of impurities
to avoid disruptions in use.
Wait a while and try again.
The water timer needs to be installed
perpendicular to the ground and it is
recommended that it is not installed at an
angle to avoid affecting the water count.
Normal error values for water counts ± 5%
Check that the WIFI network environment
is working.
Close to hubs and routers when connected
to irrigation timers.
Re-pair the timer: Press and hold the timer
button until the white light flashes rapidly
to indicate pairing. (Or remove the device
from the homepage and reconnect)
Unstable WIFI network.
Long distance from the hub
Timer not in pairing state.
