INSTALLATION INSTRUCTIONS • 8
Once the Pod to Dash Cable is run, note the
arrow. Mount the arrow upward so that it is easily
seen by the user.
Locate the Microbutton Cable.
30
Take the connector and align the arrows. Push
and rotate the collar counter-clockwise into the
locking position. Route the Cable to the desired
side of the steering wheel.
31
32
Align the arrow of the connector with the Pod
and carefully connect the two. Once installed
correctly, the connector will “Click” to confirm it
is attached correctly.
Route the Pod to Dash Cable through the vehicle,
working towards the dash, within the vicinity of
the steering wheel.
27
Take the Pod to Dash Cable and mount the dash
end directly to a secure area on or behind the
dash or to the steering column, making sure to
secure the Cable away from any moving parts that
may damage or detach the Cable. An opening of
20mm will assure proper connection.
28
29
Содержание FLUIDLOGIC
