INSTALLATION INSTRUCTIONS • 13
Using wire cutters cut the wire to separate the
hose sides completely.
Align the exterior elbow to face the output of the
Pod. Note, the output side of the Hub is located
INSIDE the Hub.
4
Apply a small amount of silicone onto the threads
of the hose and thread the hub onto the hose in a
counter-clockwise direction.
5
6
Once the Pod is completely installed, locate the
Hub.
The Hub will be installed onto the forced air hose
that attaches to the helmet. Find a clear section
of the hose that is accessible to the user.
1
Using a sharp knife, pierce the hose making a
clean cut in a 360 degree fashion. Expose the
wire core and prepare to cut it.
2
3
<
TOWARDS POD
Содержание FLUIDLOGIC
