A
17"
INSET A
MATCH DRILL
HOLE WITH
7/16" DRILL BIT
H140
N29
6882
6882
6883
H3
H11 H24
H100
H1
H28
712
H100
H1
H100
H1
798
797
797
7007
B
INSET B
H24
H11
H3
H3
N208
H3
H11
H17 H28
H4
H57
712
6883
6883
6882
797
798
798
7007
C
G3
G2
G4
G1
G4 G5
G6
G7
G3 G4
G2
G4
G5
G6
G7
*NOTE: Glider Assembly comes with its own Hardware Bag.
*NOTE: Glider may be installed in any position on swing beam.
*NOTE: Use outside swing hanger hole for one Glider Block (797) (6882) and inside swing
hanger hole for other Glider Block (797) (6882). Spacing between center hole in
Glider Blocks (797) (6882) must be 17" (as shown in Inset A).
1. Position Glider Blocks
(797) (6882)
on Swing Beam
(712) (7007)
(as shown in Inset A). Attach using
Bolt Cups
(N29)
and 3/8" Hardware
(H3) (H11) (H24) (H28) (H140).
2. Position Lower Glider Blocks
(798) (6883)
against Swing Beam
(712) (7007)
on each side of beam
(as shown in Inset A) and attach to Glider Blocks
(797) (6882)
using 1/4" Hardware
(H1) (H100).
3. Match drill holes in Lower Glider Blocks
(798) (6883)
through Glider Blocks
(797) (6882)
using a 7/16"
drill bit as shown.
4. Use 1/2" Hardware
(H4)
and 3/8" Hardware
(H3) (H11) (H17) (H28) (H57)
to finish attaching Glider
Blocks
(797) (6882)
(as shown in Inset B).
5. Attach Swing Hangers
(N208)
to Glider Blocks
(797) (6882)
with 3/8" Hardware
(H3) (H11) (H24).
6. Position the Glider Seat
(G1)
ends into the socket of Glider Handles
(G2)
and attach (as shown)
using provided Hardware
(G3) (G4) (G5) (G6)
(G7)
found in Glider Bag.
45
Step 26
Glider Assembly