Rain Master Weather Center II, Руководство пользователя

Страница: 22 / 65

Rain Master Irrigation Systems Weather Center II User Manual
Page 15
Step 5 Attach the wind cup assembly to the anemometer and
secure the assembly to the shaft using the provided Allen
wrench.
Step 6 Attach the anemometer to the tower and insert the signal
cable, with connector, through the 5/8-inch hole in the
side of tower. (See Figure 8 - Sensor Mounting
Configuration)
Step 7 Remove the lower access plate using the supplied hand
tool (ET-610). Drop the cable all the way down the tower
mast until it is accessible through the lower access panel.
Mate the connectors to the Weather Center terminal
bracket connectors (See Figure 9 - Weather Center
Terminal Access and Figure 10 - Weather Center Tower
Wiring Detail).