Rain Master RME HAWK, Руководство пользователя

Страница: 60 / 72

58
• The new limit is saved in memory (non-volatile RAM).
You just press Enter and the controller will automatically set the upper flow limits by
LEARNING them.
EXAMPLE: You wish to setup the controller to LEARN and automatically set all the
station upper flow limits. You think 30% is a good amount to add to the
upper limits over and above what the controller measures.
Successively Press: until you see
Press: you will see
Press: you will see
Press:
The controller will now LEARN and set up all the upper station flow limits. It will take
the Flow Delay time for each station. So, if you have a 36 station controller and your Flow
Delay time is 2 minutes, it will take 72 minutes. (If you want the controller to skip to
the next station at any time, press MANUAL and the station which was skipped will not
have its limit changed). During this time the LED will display which station is watering
and the flow in GPM will be on the display.
When the controller is done, you will see
Press:
Note: While each station is watering, if you have selected a Normally Closed Master
Valve, the Master Valve will come on also; if the station is in a program that has
a pump assigned to it, the pump (Station 1) will also come on with the station.
Note: If you selected Pump for any program, Station 1 will be used for the Pump and the
controller will not set an upper flow limit for Station 1.
SETTING STATION LIMITS
This feature allows you to directly set a station's upper flow limit to any value. It is an
alternate to using the LEARN mode described above. In this feature each station limit
is set one at a time.
To use this feature:
1. Successively press SETUP until you see LIMITS in the display
P E R C E N T 2 0
PROGRAM
SETUP
P E R C E N T 3 0
PROGRAM
ENTER
0
TUE
3
SETUP L I M I T S
PROGRAM
ENTER
L I M I T S
PROGRAM
QUIT