Rain Master RME HAWK, Руководство пользователя

Страница: 31 / 72

SET TIME
PROGRAM
MON
2 0 0
SAT
7
AM
PM
ENTER
SUN
1
TUE
3
THU
5 0
SET TIME
ENTER
TUE
3
ENTER
MON
2
ENTER
29
QUICK AND BASIC PROGRAMMING
Before the controller will operate, some basic information must be programmed.
1. Set the Time of day and Day of the week for the controller.
2. Establish a valid watering program:
a. Choose the program number you wish to work with (1-4).
b. Set the water days
c. Set the stations and the watering time for each station.
d. Set the start time(s) the program will begin to water on the chosen days.
SET TIME
This is used to set the current time of day and the current day of the week.
EXAMPLE 1: The time is 2:00 PM, Sat.
Press:
The controller goes back to the Automatic Mode.
EXAMPLE 2: The time is 10:35 AM, Tue.
Press:
The controller goes back to the Automatic Mode.
PROGRAM
This is used to select the program(s) you wish to work with. Once selected, you need
not change the Program # until you wish to program or review information in a different
program. There are 4 programs available for your use. They are referred to as 1, 2, 3,
and 4. If desired, it is also possible to select and clear ALL information in a program using
this function.
PROGRAM SELECTION
Select the program you wish to work with, either 1, 2, 3, or 4. While programming other
functions, the selected program number is displayed as a convenience.
EXAMPLE: You wish to work with Program 2.
Press:
The controller goes back to the Automatic Mode.
ENTER
Q
U
IC
K & BAS
IC
PRO
G
R
AM
M
IN
G