Rain Master RME HAWK, Руководство пользователя

Страница: 50 / 72

Using this feature allows you to program a master valve to be activated when program 1,2,3
or 4 is activated. If you have your pump connected to the master valve output of the controller
then use this feature to activate the pump when program 1,2,3 or 4 is activated.
EXAMPLE: You want a pump to go on when Programs 1 and 3 are running.
Press: you will see
Press: removes Programs 2 and 4 from having the Master Valve
activated when these two programs come on.
you will see
Press:
Subsequent pressing of 2 and 4 will add the Master Valve
back into Programs 2 and 4.
Note: The Master Valve will not be activated with the program if it is a Normally Open
type as selected in the next Setup option).
TYPE OF MASTER VALVE
This feature allows you to select either a normally closed or normally open master valve.
A normally closed master valve is the most common type used in irrigation. If a normally
open Master Valve is selected then it will not come on with any program but will come
on when the controller detects a main line or unscheduled overflow condition.
Note: This Setup function will be skipped if you have not selected a Master Valve for at
least one program (in the MASTER VALVE Setup function). In this case the controller
will act as if you had selected a Normally Closed Master Valve: therefore if you are
using a normally open Master Valve select the Master Valve for at least one program.
Refer to wiring diagrams and explanations in the MOUNTING & INSTALLATION
section on page 7 before configuring this option.
To select a normally open Master Valve:
Successively Press: until you see
Press: (remember this is a toggle key when used in the
SETUP mode) until you see
Press:
PUMP
48
M V 1 2 3 4
PROGRAM
SETUP
M V 1 3
PROGRAM
ENTER
MON
2
WED
4
QUIT
SETUP
ENTER
T Y P E - N C
PROGRAM
SUN
1
T Y P E - N O
PROGRAM