PULSE COMMAND MODE
Single pulse configuration of the first output and channel
assignment:
1- Select the channel on the 99 channel transmitter.
2- Press the SW1 push-button on the receiver one time.
3- The L1 LED turns on for 5 seconds.
4- During the 5 seconds, press the top arrow key on the
transmitter to send a command to the receiver.
5- The selected channel is now stored and will activate the first
output on the universal receiver.
Test operation in the single pulse mode: Display the previously
stored channel on the transmitter. Press the top arrow key, relay
#1 (terminals 3-4) and the L1 LED will remain activated as a long
as you hold down the key. As soon as you release the arrow key,
the relay is deactivated and the L1 LED turns off.
1
2
3
4
1
2
3
4
Single pulse configuration of the second output and channel
assignment:
1- Select the channel on the 99 channel transmitter.
2- Press the SW1 push-button on the receiver two times.
3- The L2 LED turns on for 5 seconds.
4- During the 5 seconds, press the top arrow key on the
transmitter to send a command to the receiver.
5- The selected channel is now stored and will activate the
second output on the universal receiver.
Test operation in the single pulse mode: Display the previously
stored channel on the transmitter. Press the top arrow key,
relay #2 (terminals 5-6) and the L2 LED will remain activated as
a long as you hold down the key. As soon as you release the
arrow key, the relay is deactivated and the L2 LED turns off.
11
